General

The MC xx-3 microbiological protection chamber of Class II provides the highest level of protection for the operator and offers clean working conditions and protects the environment from contamination. The device fulfills :

  • Protection Class II - SIST EN 12469: 2000 and DIN 12980: 2005
  • Class II, type A2 - NSF: 2008
  • Workplace Class A according to GMP class , ISO 14644-1: 1999

It is constructed and tested in accordance with SIST EN 12469: 2000 and DIN 12980: 2005.

Advantages

  • Easy maintenance
  • Easy cleaning and disinfecting
  • Rounded corners
  • Easy and safe filters replacement
  • Integrated low-noise fan
  • Automatic height placement of the front safety glass barrier
  • Progressive adjustable fan
  • Available in different sizes
  • Easily accessible electrical components

Working principle

The chamber takes part of the air from the environment and returns it back purified through absolute exhaust filter, the rest is circulating inside the chamber.

Air enters in to the chamber from the front side, through front opening and through slots in the working segments. Below segments the fresh air from environment and recirculating air are mixed.

The mixture of fresh air from the surroundings and the air circulating within the chamber further passes through the inlet filters of quality H13 (EN 1822), which are installed in the base.

Furthermore, the air travels through the return channel in the upper part and enters the overpressure hood. Part of the air (app. 30%) a fan pushes through exhaust filter quality H14 (EN 1822) back to environment , rest of the air (app.70%) fan pushes through filter placed above working area quality H14 (EN 1822) and through the distribution grid into working area. Ratio of the exhaust and inlet air is provided through the area ratio between exhaust filter and filter placed above the working area.

Distribution grid spreads air laminar over the working area and vertically directs it towards the working surface of the chamber. The laminar air flow takes away dust particles generated by material manipulation. An air curtain is formed on the front of the chamber, between the operator and the location of the dust, which separates the working space in the chamber from the surrounding area.
The air curtain protects the work area from possible external contamination and prevents airborne particles from flowing out of the work space.

An additional HEPA filtration under working segments protects working and output filters, so they are usually never changed because they are not burdened with contaminated dust particles. Filters under working segments are exchanged within the operating range when the chamber works. They are properly packed inside the working area in safe packaging. Access to these filters is easy and safe without risk to service personnel, possible contamination of the environment and the environment. The chamber is intended primarily for working with dangerous, risky groups of microorganisms, substances that are very dangerous for the operator and the environment.

 

Control

A visual touch screen is designed for visualization and more transparent management. It is located on the front of the chamber, next to the user. Its basic task is system management, error display and service settings.

 

Specifications

  • Surface-protected metal construction with powder coating in color RAL 9010
  • The base is made of powder-colored (RAL 5015)
  • Workplace and work segments made of high quality stainless steel sheet
    • Workplace is entirely made of brushed stainless steel AISI 304 (EN 1.4301)
    • Work segments are made of brushed stainless steel AISI 316L (EN 1.4404)
  • Work bench consists of segments, easy to clean and autoclave
  • Working height for sittting position - 800 mm
  • All surfaces and corners built according to GMP, GLP standard
  • Construction of a chamber constructed under a slope of 8 ° - easier sitting and working of the operator
  • Good illumination of working space (> 1000 lux)
  • Noise <60dB
  • Lateral visibility of the workplace, sides of safety glass
  • Motorized raising of the front safety glass (automatic layout to the appropriate height for the selected mode)
  • Microprocessor control of operation and safety functions (alarming of limit values)
  • User-selection display mode and parameter setting (in case of validation and service)
  • Absolute filtration of exhaust air and air in the field of work, with quality filters H14-EN1822: 2010
  • Integrated connectors for performing the integrity of absolute H14 filters (DOP / DEHS test)
  • Connections in the field of work:
    • 2x socket 220V / 2,5A
    • 1x RS 232 connector (connection internal workplace - external side)
    • 1x USB connector (connection internal workplace - external side)

Options

  • Stainless version
  • Built-in UV bactericidal bulb
  • In the back wall there is a built-in safety glass for the external layout of the monitor
  • Soaking hood
  • Faucet for gas, air, vacuum
  • El. sockets
  • Isokinetic probe
  • Speed sensor
  • Temperature and humidity sensor
  • Performance according to customer requirements

Type

MC 9-3

MC 12-3

MC 15-3

MC 18-3

Outside dimension
W x D x H [mm]

1030x790x2220

1340x790x2220

1650x790x2220

1960x790x2220

Workplace
W x D x H [mm]

880x600x600

1190x600x600

1500x600x600

1810x600x600

Max. connection power without socket [W]

800

800

1400

1400

Max. connection power on socket  [W]

550

550

550

550

Laminar air flow [m/s]

0,4

0,4

0,4

0,4

Voltage [V/Hz]

230/50

230/50

230/50

230/50

Weight [kg]

245

285

340

410

ABS. working filters H14 [dim. mm/pcs]

305x610x69/3

305x610x69/4

305x610x69/5

305x610x69/6

ABS. exhaust filters H14 [dim. mm/pcs]

457x457x69/1

305x457x69/2

305x457x78/2

305x457x69/3

ABS. inlet filter H13 86,5x202x600 mm [pcs]

8

13

16

20

 

Contact us